Skip to content

Glossary

Ambient (%). A lighting setting. It brightens the shading in the 3D view only. It never changes a number. It is not the same as Site ambient. See 3D View.

Ambient contrast. (projector light + site ambient) / site ambient. The Photometric view shows it as a quantity. The colour bar has marks at 5:1 (min) and 10:1 (ideal). The default range is 5 / 20 / 50. See Analysis.

ANSI lumens. A standard brightness rating of projectors. LUMAMATTERS treats every brightness rating as ANSI lumens. See Physics model and limits.

Auto range. A legend button. It sets Min and Max from the 1st and 99th percentile of the lit target surfaces. See View Modes.

Beta. The state of this release. It is free to use during the beta. LUMAMATTERS will always stay free in one form or another, with all features available. A small BETA mark sits next to the name in the app header and on report pages. Help > About LUMAMATTERS shows the licence summary. See Install.

Blend / overlap. The area where two projector images cover the same surface. In the Overlap view, the blend zone of a pair is their full overlap. See View modes and Analysis.

Blended / Raw. The Light switch of the Photometric view. Blended applies the blend ramps between projectors. Raw adds the projectors in full. See Analysis.

Compare. The table in the Variations panel. It lists metrics of the variations side by side. See Variations and Compare.

Default ρ. The project default for reflectance. Objects without their own Reflectance use it. It starts at 1.00. See Physics model and limits.

Feedback. Help > Send feedback… builds a short report of what went wrong, plus anonymous system facts. You copy it, or you open it in your mail program. See FAQ.

Frustum. The pyramid of light that a projector sends out. Frustum lines in the 3D view show its edges. See 3D view.

Illuminance. The light that arrives on a surface, in lx. It ignores the colour of the surface and your viewpoint. It is one of the four quantities of the Photometric view. For how bright a surface looks, see Luminance. See Analysis.

Image shift. See Lens shift.

Lens shift. A move of the image up, down, left or right by sliding the lens. The projector does not move. The limits come from the Projector database.

Light output (%). A percentage that lowers the lumens of one projector, for dimming or ageing. It is a field in Properties.

lx. The unit symbol of illuminance. “lx” stands for lux. One lx is one lumen per square metre.

Luminance. How bright a matte surface looks from a viewpoint, in cd/m². L = ρ × E / π. ρ is the reflectance of the surface. E is the illuminance on it. See Physics model and limits.

Magnet. The button in the top strip of the 3D view. It turns on snapping for the Move, Rotate and Scale gizmos. It is off on a fresh machine. See 3D view.

Maker throw data. The throw-distance formula or table of the maker for a lens. See Projector database.

Measurement. A distance between two points in the 3D view, with its value in m. A note with a leader line is an annotation. You make both with the Measure tool. See Measure Tools.

Native resolution. The pixel grid of the panel of the projector.

Null. An empty object in the Outliner. It has a position but no shape. You can parent projectors to nulls so that a group moves together. See Outliner.

Photometric. The view mode on key 2. It shows light on surfaces. It has four quantities: Illuminance, Luminance, Surface contrast and Ambient contrast. See View modes.

Pixel density / pixel size. The number of projected pixels per metre on a surface, or the size of one pixel in mm. See View modes.

Planning aid. What this app is: numbers for planning. Check them against maker sheets and on site.

Probe. A readout of one point under the pointer. Alt+click a point in the 3D view to pin it. The numbers show in the Summary. See Analysis.

Project format. The version number inside a .luma file. See Project files.

Projection centre. The optical centre of the lens, where the light rays start in the model. The physics measures distances from here. Makers usually measure from the front of the lens.

Quantity. One of the four things that the Photometric view can show. You choose it in the legend. See View modes.

Reflectance (ρ). The share of the light that a surface sends back, from 0 to 1. You set it for each object in Properties > Surface. See Properties.

Saved camera. A camera object in the project that stores a view. You make one with Save view as camera…. See 3D view.

Share view-only scene. File > Share view-only scene… makes a viewer page. The page opens in a web browser, and the viewer does not need LUMAMATTERS. See Share a view-only scene.

Site ambient. One assumed light level on all surfaces without the projectors, in lx. A new project starts at 10 lx. Ambient contrast uses it. See Analysis.

Slug. The short file-safe name of a project. It is used as its folder name and file name.

Snap. The Measure tool jumps to a vertex, an edge end or middle, a lens centre, a bounding-box point or a surface point near the pointer. Ctrl turns it off for one click. You choose the targets in the Snap steps popover (the arrow beside the Magnet). See Measure Tools.

Snapshot. A saved version of the whole project state. See Projects and snapshots.

Surface contrast. The ratio p99 / p1 of the illuminance on the lit part of one object. It shows how evenly the object is lit. See Analysis.

Throw distance. The distance from the projector to the surface. The app shows Throw distance (maker) and Throw ratio (centre) in Properties.

Throw ratio. The throw distance divided by the image width. A ratio of 1.5 puts an image of 3 m width at 4.5 m. See Physics model and limits.

Variation. One version of the projector rig on the same venue. The venue is the same in all variations. The rig differs. The panel is called Variations. See Variations and Compare.

Venue. The 3D model of the space. It is made of one or more imported files. See Blender export and import.

Viewpoint. A named view direction (Top, Bottom, Front, Back, Left or Right) from View > Viewpoint. A saved camera is a different thing. See 3D view.

Workspace. The folder on your disk that holds all your projects. See First start and workspace.

Zoom out of range. A flag. The throw ratio is outside the zoom range of the lens. The numbers still use it as given.

Home | Physics model and limits | Projector database | FAQ